To find out more about this topic, check out the Barrier Franchise page and fill out the form at the end of it.

Find out the information you need on our site, starting with the product page: windows, doors and insulating windows. You can also find out more in the “Brochures” section of the Digital Materials page.

The maximum size is 4mp in colour and 6mp in white.

The upper class anti-theft is RC2. It has all the mushroom type blockers and the handle with the key, as opposed to the standard one.

Yes, at Barrier you can produce and install doors without threshold.

The set time is 8 hours. This includes processing, technical and financial validation.

Their order has the same order flow as any Barrier product. The delivery time is 3 to 5 business days.

This can be done very easily by scanning the QR code and entering the order code.

Blockers, drips, protective foil, profile label, glass label, screen printing on the distance rod.

These can be found in the “Certifications” section of the Digital Materials page.

To find out more about the guarantees offered by Barrier, we invite you to visit the Digital Materials page, the section “Quality assessment manuals”.

The size required for transport is 4400 x 2200mm.

Barrier can deliver products to any destination, both from Romania and Europe.

Yes, you can. The request for the price offer will be sent through the contact form.

For aluminium profiles, the following manufacturers are Barrier collaborators: Alumil, Cortizo, Shuco and Aluprof.

One of the main advantages offered by aluminium joinery is the service life. As time goes by the aluminium hardens, has a reduced weight compared to PVC and laminated wood, and the coefficient of expansion is very small. Significant differences are also regarding the weight of the glazed surface, keeping the exterior appearance for a long time. It is excellent in terms of the effects of the sun’s rays on it. It is the recommended material for large joints taking into account weight and dilation. Another advantage is the possibility to choose, from a variety of colours and textures, even two-colour, with a remarkable resistance over time.

The main advantages of a self-supporting suspended gate are the removal of the rail from the pavement that can accumulate ice, debris (requiring permanent cleaning) and quiet operation.

The maximum width is 2500mm on the 39mm blade and 3000mm on the 45mm blade.

The minimum size is 240mm or 180mm with rear springs.

You can choose your favourite shade from the RAL colour range, your favourite texture and design, and our specialists will help you change the ambience of your home.

The best light transmission coefficient can be identified on the Float glass.

Laminated glass provides special protection and increased comfort. This avoids discoloration of parquet, furniture, curtains or other objects in the room due to ultraviolet rays.

The maximum quota executed by Barrier is 3499×2000 mm.

From the point of view of the physical phenomenon, condensation is the transformation of water from vapours into liquid. The air can absorb more water as the temperature is higher. Therefore, when purchasing the carpentry you opt for quality, in terms of materials, execution and assembly, to obtain a good thermal insulation. In addition to proper ventilation, another important factor for avoiding condensation is adequate room heating and a balanced arrangement of heating sources.

Glass options are Float, Lowe, Planistar Sun, Triplex, and a host of other combinations.

WINDOWS DO NOT MOUNT IN FOAM. It has a sealing role and is applied between the window sill and the wall. Do not accept the installation of windows only in foam, as there is a risk that they will bend and even fall. It is not recommended to open and close the window less than two hours after foam insulation. After 48 hours after foam sealing the windows, the surplus is removed and the interior / exterior masonry can be finished. If the foam is exposed, there is a risk that it will absorb the water from the precipitation and facilitate the appearance of the mould. The protective sheet of PVC profiles will be removed only after finishing the walls.

Barrier windows and doors are designed to withstand the extreme weather. The quality of the assembly made of PVC joinery and with insulated glass Barrier can withstand the hottest summers and the strongest sun, as well as the most severe winters, storms and even hail.

The windows are fixed to the wall with screws and special fasteners. The fixing elements vary depending on the type of material from which the wall is built (brick, concrete, BCA) on which the window will be mounted. The mounting team will use the fasteners suitable for the wall type.

The use of PVC profiles is not recommended in large joints where, besides the fact that we have a large expansion coefficient, problems may arise when joining between the heel and the wall, between the heel and the movable sheet, even bending of profiles. The weight of these large joints must also be taken into account. If in aluminium, which is the easiest, the joint systems at the corners are mechanical, in PVC, the joint is by hot melting, but the steel reinforcement cannot be welded.

Also, it is not recommended to use PVC joinery profiles in the case of exterior doors for heavy traffic, interior doors, or glazed interior compartments. Choosing the material variant is quite complicated; there are special cases, so we recommend the advice of a specialist.

For PVC windows, the service life is 10 years. For aluminium windows, the service life is 15 years.